Govt Exams Mock Test FREE | Online Quiz Competition

Q1. In circuit breaker, the term MCCB stands for

miniature compact circuit breaker

molded case circuit breaker

modern closed circuit breaker

miniature case circuit breaker

Q2. What is the function of surge protection device in generator terminal equipment?

Metering

Synchronizing

Unit protection

Limit transient voltage

Q3. Proximity effect is more in case of__________.

transformer

generator

underground cable

overhead line

Q4. The boundary of a protective zone is determined by the locations of____________.

circuit breakers

Transformer

CTs

none of the above

Q5. For a load flow solution the quantities specified at the load bus are

P and Q

P and δ

Q and |V|

P and |V|

Q6. In a circuit breaker, the active recovery voltage depends on

power factor

armature reaction

circuit conditions

all of the above

Q7. For a good voltage profile, under no load condition, a long line needs

shunt capacitors at the receiving end

shunt reactors at the receiving end

shunt resistance at sending end

shunt capacitance at sending end

Q8. Find the incorrect statement regarding HVDC transmission

There is no corona loss in HVDC system

Transient stability does not pose any limit in HVDC system

Tower size in HVDC is smaller as compared to equivalent AC transmission for same power and distance

When two AC transmission networks are connected by DC transmission the fault level of each system remains unchanged

Q9. The two-part tariff is used for

domestic consumers

commercial consumers

agricultural consumers

industrial consumers

Q10. In the circuit shown below, the knee current of the ideal zener diode is 10 mA. To maintain 5 V across \(R_L\), the minimum value of \(R_L\) in ohm and the maximum power rating of the zener diode in mW respectively are

125 and 125

125 and 250

250 and 125

250 and 250

Quiz

Year 2025

December
Week # 3 Quiz 2

Q1. In circuit breaker, the term MCCB stands for

Q2. What is the function of surge protection device in generator terminal equipment?

Q3. Proximity effect is more in case of__________.

Q4. The boundary of a protective zone is determined by the locations of____________.

Q5. For a load flow solution the quantities specified at the load bus are

Q6. In a circuit breaker, the active recovery voltage depends on

Q7. For a good voltage profile, under no load condition, a long line needs

Q8. Find the incorrect statement regarding HVDC transmission

Q9. The two-part tariff is used for

Q10. In the circuit shown below, the knee current of the ideal zener diode is 10 mA. To maintain 5 V across \(R_L\), the minimum value of \(R_L\) in ohm and the maximum power rating of the zener diode in mW respectively are

Quiz

Year 2025

January Week # 2 Expire on 07 Feb 2025

January Week # 3 Expire on 14 Feb 2025

January Week # 4 Expire on 21 Feb 2025

February Week # 1 Expire on 28 Feb 2025

December Week # 3 Quiz 2

Q1. In circuit breaker, the term MCCB stands for

Q2. What is the function of surge protection device in generator terminal equipment?

Q3. Proximity effect is more in case of__________.

Q4. The boundary of a protective zone is determined by the locations of____________.

Q5. For a load flow solution the quantities specified at the load bus are

Q6. In a circuit breaker, the active recovery voltage depends on

Q7. For a good voltage profile, under no load condition, a long line needs

Q8. Find the incorrect statement regarding HVDC transmission

Q9. The two-part tariff is used for

Q10. In the circuit shown below, the knee current of the ideal zener diode is 10 mA. To maintain 5 V across \(R_L\), the minimum value of \(R_L\) in ohm and the maximum power rating of the zener diode in mW respectively are

Record & Track Your Performance

December
Week # 3 Quiz 2