MCQ
Papers
Previous Year Paper
Exam
Quiz
Tournament
Test Series
Assessment Services
Login/Sign Up
MCQ
BASIC ELECTRONICS
CONTROL SYSTEM ENGINEERING
DIGITAL ELECTRONICS
ELECTRICAL CIRCUIT ANALYSIS
ELECTRICAL ENERGY CONSERVATION AND AUDITING
ELECTRICAL ENGINEERING MATERIALS
ELECTRICAL MACHINES
ELECTRICAL VEHICLES
ELECTRICAL WIRING
ELECTROMAGNETICS
MEASUREMENT & INSTRUMENTATION
MICROPROCESSOR AND MICROCONTROLLER INTERFACING
POWER ELECTRONICS & DRIVES
POWER SYSTEM
SIGNALS & SYSTEMS
UTILIZATION OF ELECTRICAL ENERGY
ELECTRICAL VEHICLES
Q1.
In a lead-acid battery
The number of negative plates is one more than the number of positive plates.
The number of positive plates is one more than the number of negative plates
The difference between the number of positive and negative plates is always 2.
The number of positive and negative plates are equal.
Show Answer
Solution
Q2.
Which one of the following actions will occur during the discharging of the lead-acid storage battery?
acid becomes stronger
acid becomes weaker
hydrogen gas is liberated
both plates chemically change to ammonium chloride
Show Answer
Solution
Q3.
Which of the following is a type of a valve regulated lead–acid (VRLA) battery?
Nickel-cadmium batteries
Primary cell batteries
Dry cell batteries
Absorbed glass mat (AGM) batteries
Show Answer
Solution
Q4.
A battery with a capacity of 1800 mAh is to be used in a device that draws 120 mA continuously. Ignoring possible loss in capacity as a result of load current magnitude, how long should the battery be able to deliver power?
15 hours
5 hours
20 hours
10 hours
Show Answer
Solution
Q5.
Petroleum jelly is applied to the terminals of the lead acid battery in order to prevent
corrosion
local heating
short circuiting
all of these
Show Answer
Solution
Q6.
The internal resistance of a dry cell is of the order of
0.2 to 0.4 Ohm.
1 to 1.5 Ohm.
2 to 5 Ohm.
1 to 15 Ohm.
Show Answer
Solution
Q7.
Nickel-iron cell has ............... weight and ................. life than that of a lead-acid cell.
less, longer
more, longer
less, shorter
more, shorter
Show Answer
Solution
Q8.
Consider the series connection of batteries as shown in Fig. The total energy storage is
2400 Wh
4800 Wh
1200 Wh
3600 Wh
Show Answer
Solution
Q9.
Consider the following statements and choose the correct option.
Statement 1: The specific gravity of the electrolyte in a lead-acid cell decreases as the charge in the cell decreases.
Statement 2: The energy density of lithium-ion is typically twice that of the standard nickel-cadmium cell.
Statement 1 is TRUE and Statement 2 is FALSE
Statement 1 is FALSE and Statement 2 is TRUE
Both Statement 1 and Statement 2 are FALSE
Both Statement 1 and Statement 2 are TRUE
Show Answer
Solution
Q10.
Determine the discharge time and average current output of a battery with a capacity rating of 1000 mAh if it is discharged at 0.5 C.
2 hours, 500 mA
1 hour, 1000 mA
1 hour, 750 mA
1 hour, 500 mA
Show Answer
Solution
1
2
Next Page
Hello Qualexians...
Login to access detailed solutions and many more exam preparation activities at Qualexe.